General specifications of a 100 kg/hr incinerator

General specifications of a 100 kg/hr incinerator
model HICLOVER YD100
1 Machine working mode Oil + Power
2 Voltage 220V 1P
3 Oil consumption (lit/hr) Average 33Liters/hour/total incinerator 3 burners
6 Incineration rate average 100kgs per hour
7 Feed mode manual
8 Primary combustion rate 1080 liters
9 Secondary combustion rate 207 Liters
10 Tertiary combustion rate 452 liters
11 Combustion chamber material High temp. resistant concrete
12 Internal dimensions (1st chamber) 120*100*90cm(l*w*h) = 1080 lit
13 Internal dimensions (2nd  chamber) Diameter 42*150cm=207 Liters
14 Internal dimensions (3rd  chamber) Diameter 60*160cm=452 Liters
15 External dimensions 220*160*370 cm (l*w*h)
16 Door opening 90*90 cm
17 Additional air fan 1 fan (on the door)
18 Fuel type Diesel oil
19 Burner Italy Baltur
20 Chimney length 5 Meters
21 Chimney type and material 1 Meter High temp. resistant concrete +4 Meter Stainless steel
22 Smoke and smell filter Dry Scrubber 2 stages
23 Temperature monitor Yes, (all 3 chambers)
24 Temperature control yes
25 Oil tank yes
26 Burning efficiency yes
27 1st chamber temperature 800-1000 oC
28 2nd chamber temperature 1000-1200 oC
29 3rd chamber temperature 1000-1300 oC
30 Smoke residency time >2 sec.
31 Gross weight average 6.5 Ton
32 No. of Burners 3
INCINERATEUR COMBUSTION DESTRUCTION OF MEDICAL WASTE PYROLYTIC AND LABORATORY,incinerator medical waste manufacturer

Morocco pet cemetery,Gambia medical incinerator,Cote d’Ivoire Mobile Incinerator

The dangers of burn pit exposures at Forward Operating Base Marez in Mosul, Iraq, were first noticed when the U.S. military presence was at its height, but nothing was done to correct the problem, Fox News has learned.Mauritania incinerating,Ethiopia medical waste incinerator manufacturer,Tanzania china incinerator manufacturer

A former Army major, who served as the base’s environmental officer back in 2004, said he warned Marez’s top brass of the dangerous chemical compounds that were being released into the air after medical waste, chemicals and trash were thrown into open-air garbage pits and set ablaze. But, he added, his warnings fell on deaf ears.

“They weren’t very receptive when I brought it up,” retired Maj. John “Doc” Nelson said in a recent interview with Fox News’ investigative unit. “We could never get an answer.”

“I’m worried about the burn pits becoming another Vietnam or Agent Orange,” he added, “and I don’t think these vets should have to wait for 25 years for someone to recognize that there’s a problem.”

During the wars in both Iraq and Afghanistan, the burn-pit disposal method was originally adopted as a temporary way to get rid of the massive amounts of waste and garbage generated at numerous bases. A range of materials went to the pits for incineration: plastics, batteries, appliances, medicine, dead animals, even human waste. The items were often set ablaze with jet fuel as the accelerant.

The incineration generated numerous pollutants including carbon monoxide and dioxin — the same chemical compound found in Agent Orange, which left many Vietnam vets sick after it was used as a defoliant in that conflict.South Sudan insinerator,Mali incinerators animal,Djibouti clover medical ltd

The 65-year-old Nelson says that he was able to see the dangers of the burn pits while serving at FOB Marez.

“It would literally darken the sky,” he said, recalling the large plumes of smoke that rose from the pit and hung over the base.

“I remember one day, I was standing back about 300 feet. I could still see the flames rising above the pit.”

Nelson alleges that the trash piled up at his base’s burn pit over the two years that he was there, and that the smoldering fires almost never went out.

pet cemetery

I am looking for modern hospital incinerator which can stand 1200 deg ,burn-rate 50 kg to 100 kg /hr

I’m actually thinking that the containerized incinerators would be better as I plan to install in places with no structure at all. Please send me a quotation for a containerized unit that can manage 200kg/hour.I want to start a pet cremation business in melbourne, australia.
need a unit that uses natural gas and can incinerate large dogs and pigs.we are looking for a suitable incinerator for one of our clients. it is a small hospital of 10bed capacity, with no theatre, but they do deliveries.I have a medical laboratory and a medical services company I am interested in having a small medical waste disposal machine to use together with other laboratories and avoid outsourcing this sevice.
please what you advice and what are the requirement and possibilities.Bonjour nous sommes un bureaux d’etudes spécialisé dans le domaine de l’environnement et désirons trouver un fabricant d’incinérateur pour un partenariat de vente et installations .
salutations

INCINERATEUR COMBUSTION DESTRUCTION OF MEDICAL WASTE PYROLYTIC AND LABORATORY,incinerator medical waste manufacturer

hazardous waste disposal

? Low running and maintenance costs

? Fully Automatic and simple to operate control panel

? Afterburner Preheat

? Incineration Temperatures in Excess of 1300 degrees C

? 5mm Steel Casing andFully insulated

? Dense Refractory Concrete Lining Rated to 1600 degrees C

? Solid Hearth to Allow Maximum Burnout

? Large Top Opening Lid For Easy Loading

? Wide Door For Ash Removal

? Stainless Steel Flue as standard

? After Burner Fitted as standard

? 12 Month or 1000 hours Warranty.

? Optional Stainless Steel Casing

? Optional gas cleaning systems

? Custom sizes available with up to 500kgs per hour

? CE Marking

? Heat Recovery System option

animal incinerators for sale

Feed Capacity: average 200kg pet cremation,garden incinerator,animal incinerators for sale.
This means that we can pour the waste of 200kg or more into the incinerator at one time for burning it?

In your email, you told me that The incinerator can be used either with diesel or Gas but both diesel and/or gas use electric. And, also in its specification it shows that it need voltage of 220V.
We DO NOT understand this point. i.e. the incinerator can start the process of burning by using which power supply as its energy? Diesel (Gas) or electricity?

3. What is the meaning of (residency time)?
1. How much installation and training cost in Cambodia?

2. How long is the training time ( 2 days, 5 days..?)

3. The Incinerator can be installed at any special place? Or, it must be installed under the shelter?

4. Model: TS100(PLC) can be used with fuel, Gas, or Electricity?

5. Can you let us know what is its custom tax code?

animal incinerator for sale

We are looking for an incineration system for one of our client. Kindly let me have your technical and commercial offer for the combustor, in a day there will be a waste of 300 KG pet cremations,domestic incinerator,animal incinerator for sale ( which includes wood, leather, food, wood, waste etc.

Technical Specifications:
Fuel Diesel Oil
Chamber Capacity 0.15m3-0.20m3
Burn rate 15-20kgs per hour
Avg Ash Residue (%) 3%
Operating Temperature about 13000C
Gas Retention in Secondary Chamber 2 Seconds with
Temperature Monitoring and Thermostatic device system
Shelter
12 feetX12 feet Tin shed
Concrete floor
Half brick wall with heavy-duty steel construction
Upper portion of the wall will be covered by iron grill
Big front door

1. So, incinerator need to connect to electrical power supply of 220V AND need to use Oil (or Gas) also. Correct?

2. Electrical power 220V is for (all control functions of incinerator) AND (Oil or Gas) for burning waste material. Correct?
· How much is your 100 kg/hr medical waste incinerator with venture water scrubber?

· Do you have air emission test results? If so please send a sample

· Can you containerize it with fuel tanks for 3 days operations?

Angola pet cremation cost,Namibia 3 kg incinerator,Gambia encenerator

Should have required certification standards from approved certification regulatory body.
Incinerator should be able to burn hazardous and non-hazardous waste at a minimum temperatures of 850’C-1100’c
Must have two chambers that’s primary chamber catering for destruction burning at 850’c and secondary chamber for destruction of

gaseous waste burning at 1100’c.
Incinerators must meet medical waste disposal provisions mechanism in accordance with NEMA regulations and requirements.
Incinerators must all meet the ambient air pollutant guidelines.
Incinerator should meet the sitting ground ambient requirements as per site.
Housing shed for incinerator should meet minimum standards to allow free movement of incinerator operators and waste storage area
Incinerators chimney must be heavy duty, durable and heat resistant to burst during combustion.
Incinerator door must be heavyduty, durable and tight to avoid smoke in let during combustion.
Incinerator must have bulk load capacity of upto 300kgs with a minimum destruction capacity of up 100kgs per hour
Waste shed housing the incinerator with enough working space and waste storage area?
Must have an ash pit with a capacity of up 10,000 ltrs.
Must meet all occupation health safety and environment requirements and hazards.

Niger hazardous waste incinerators,Guinea-Bissau laboratory incinerator,Eritrea medical waste incinerators manufacturers

he meeting also highlighted that the Provincial Sustainable Development Fund be operational. In order to resolve the issues of interpretation of international guidelines vis-a-vie Punjab Hospital Waste Management Rules 2014, Benin clover medical limited,Senegal incinerator manufacturer china,Ghana medical incinerator from chinait was decided to constitute a technical working group comprising representatives of the Punjab Healthcare Commission, Specialized Healthcare and Medical Education Department, Primary and Secondary Healthcare Department, Environment Protection Department and Hepatitis Control Programme for clarifying required actions and roles of responsible executing agencies.

All hospitals are to ensure proper constitution of Waste Management Teams and designation of duties and roles to be performed by each member and responsible persons. It was appreciated that the Punjab Environmental Protection Council, under Section 3 of the PEPA 1997 (amended 2012), had been made functional and had conducted three meetings during the last year.

While welcoming the participants, Dr Muhammad Ajmal Khan said that prior to the PHC, Hospital Waste Management was not considered to be a major issue. He mentioned different steps taken by the PHC for ensuring quality in health service delivery and the safety of patients and the population at large.

Rising awareness about hygienic disposal of medical wastes to reduce chances of disease spread as well as encouraging environmental cleanliness are two major driving factors of this market. Medical waste products might be largely harmful as it could contain pathogens and harmful disease spreading agents, thus generating the need to dispose the waste quickly and efficiently. To do this, medical incinerators come in handy, which can literally incinerate the entire waste and maintain safety. However the gaseous and solid by-products formed by the incineration processes might harm the environment. This could discourage few healthcare practitioners from using the devices, thus hampering the market. Nevertheless, new incinerators are being developed by many manufacturing parties, which promise to not leave any by-product traces, consequently offsetting the restraints.Gambia diesel oil incinerator,Botswana incinerators manufacturers china,Namibia msw incinerator manufacturers

The global medical incinerators market is regionally segmented into North America, South America, Middle East and Africa, Asia Pacific, and Europe. From these, North America grosses maximum revenue on account of a high usage noted in leading countries from this region.