2 medical waste incinerators model YD-50, 150 kg feed capacity, 220/380 V, 50 Hz c/w 5 mtr. chimney.
Bio-medical waste management plant requirements:

Disinfecting/sterilizing the contaminated medical wastes, main combustion chamber, post combustion chamber, heat exchanger, ash removal units and flue gas treatment systems, with the following details:

Hourly capacity of the system:           from 250 up to 500 Kgs/ hour

Duration of operation:                        from 14 up to 18 hrs/ day

Fuel type to be used:                         Diesel or alternative

Calorific value of the waste:               3500 up to the maximum limit kcal/ Kg

Minimum operating temperature of primary chamber: 1000 degrees celcius

a smaller  capacity of 150 to 250  kg/feed capacity
will be good for comparison. Our main byproducts are the slaughtered unwanted carcass.

•             Using diesel as fuel

•             Capacity 50kg per hour

•             chambers material: Refractory Concrete

•             Number of chambers: Two

•             Manual feed
solicito un horno crematorio para mascotas, de una capacidad de 80 kl, aprox. solo una unidad, especificaciones tecnicas, totalmente industrial, atte. erika martinez peru

50 kg/  hour  capacity incinerators

·        Burning Rate: 50kos/hr

·        Feed Capacity:  150kqs

·        Primary  Combustion  Chamber:  900 liters

·        Secondary  Combustion  Chamber:  300 liters

·        Mix Combustion  Chamber:  Yes

·        Smoke Filter Chamber:  Yes

·        Feed Mode: Manual

·        Power: 0.7Kw

·        Fuel Type: Diesel Oil/ Natural Gas/LPG

·        Internal Dimensions:  120 x 90 x 85cm (primary  chamber)

·        External  Dimensions:  200 x 160 x 310cm (without  chimney)

·        Burning  Efficiency:  >98%

small  scale medical waste  incinerators.The required burning capacity of those incinerators are 10 kg and 15 kg/hr .The fuel oil using for those incinerator is diesel oil .

Poultry Incinerator – 400 kgs feed per day.a small scale incinerator of burning capacity 30kg/hr=1No. Note that it should be portable as this is meant for oil fields work on tented camps. Also it has to be diesel operated as our location is remote. 150!kg per hour LPG smokeless incinerator to be used at the international airport. This is a requirement bu the bio security that all international flights need all rubbish burnt within a set time.Required load capacity is 150Kg
Chamber – Primar 900 liters Secondary: 300Litres
Chimney 8M
Burning Rate: 50kgs/hr    Yes
Feed Capacity: 150kgs    Yes
Primary Combustion Chamber: 900 litres    Yes
Secondary Combustion Chamber: 300 litres    Yes
Mix Combustion Chamber: Yes    Yes
Smoke Filter Chamber: Yes    Yes
Feed Mode: Manual    Yes
Power: 0.7Kw    Yes
Fuel Type: Diesel Oil/ Natural Gas/LPG    Yes. Different Price if oil or gas fuel.
Internal Dimensions: 120 x 90 x 85cm (primary chamber)    Yes
External Dimensions: 200 x 160 x 310cm (without chimney)    Yes
Burning Efficiency: >98%    Yes

50 bed hospital and would like to have your recommendation for incinerator that can effectively handle the load of 50 bed hospital.Incinerator for burnable garbage (paper & organic) medium capacity (100/150 lts). Bio Medical Waste Incinerators,

Capacity: 50kgs per hour Medical Waste Incinerator  Model  TS50 ( PLC ) with both option on Fuel ( Natural Gas and / or Diesel2 Burners
2 Temperature Thermocouple
5 meters for thermal gasket
1 incinerator control case
1 Blower ecologically friendly incinerator for burning polyproplylene bags we have 10 tons weekly

in acinerator with 300 kg/ hour by double filter wet and dry.Pet Dead Body Incinerator upto 80 kg ,gas operated is prefered. animal waste incinerator with capacity about 40Kgs. We will use this product to burn the animal corpses in normal way (not sick aninal).Could you please forward me quotation for incinerator that is suitable for service Town with a population of 200,000 people including other general town waste to burn. Technical specifications data sheet
List and quantities of consumables required per month
List and cost of all the spares required annually
List and costs of all the spares required in 5 yrs
List and costs of all the spares required in 10 yrs

2 incinerators one with 500kg/day burn capacity another one with 1000kg/day burn capacity

1 x Electrode

1 x Fuel Filter

1 x Photocell

1 x Flexible pipe

1 x Nozzle

1 x Control Box

–          150 KG/HR

–          Compliant with EU rules, Directive 2000/76/EC

–          Fuel type: Diesel

–          Easy management and maintenance

–          Temperatures:

850 deg C for municipal waste

1000 deg C for medical waste

1100 deg C for dangerous waste containing halogenated organic substances with content of chlorine or its compounds.

1. Technical specifications;

I. Size of the Incinerator 4,410W x 3,037L x 4,836H mm

II. Capacity of the Incinerator Medical waste 50 kg/hr. batch feeding (low degree caloric value: 4,000 5,000kcal/kg)

III. Utility

Utility condition for the incineration equipment operating is the following.

1) Fuel: Light oil or Kerosene

2) Electricity

Motor

-0.1 — 110kW: AC 220V x 3PH x 50Hz

– Below 0.1kW: AC 220V x 1PH x 50Hz Control Circuit

– MCC control: AC 220V x 1PH x 50Hz

– Instrument: AC 220V x 1PH x 50Hz

– Switch Gear: AC 220V x 1PH x 50Hz

2. Door -to-door transportation, Installation, Commissioning and Training

3. Pricing quotation

– Price needs to be provided in Ethiopian Birr (incl. VAT)

– Price should include additional cost elements such as freight, insurance, installation and training for key human resource, until acceptance duty where applicable